The ring is too tight to be taken off when wearing it on your hand. It's a lazy man's trick that the ring can't be taken off for a long time

The ring on the finger, because of various reasons can not take down, what to do? Here are some tips for taking off the ring.

What if the ring doesn't come off?

There are many ways to remove a ring. At the beginning, most people don't want to destroy the ring, so they have to squeeze it out. Usually we will take out the ring by lubrication, including soap, glycerin, or other oily products to achieve the purpose of lubrication, but with the loss of time, if it can not be removed within a few minutes, it will enter the swelling stage. But generally, the part of our ring stuck is in the joint, so just push the ring back to the proximal end can reduce swelling and restore blood flow. At this time, the blood supply of the finger will be blocked, and it will be more and more difficult to remove the ring once the blood supply is too long.

If the ring is too hard to destroy or to be removed in a way that does not damage the ring, the method is to try to drive the blood from the far end of the finger back to the end of the ring. So holding your hands higher than your heart is a way to take them out when they are less swollen; In addition, there are also ways to bind the ring from the distal end to the proximal end in the way of plate line or elastic rubber, and then slowly take out the ring after a period of time. In fact, if you have patience and slowly use the way of lubrication and rotation, under moderate local anesthesia, before the swelling does not let the ring embed into the skin, it can actually take a period of time to remove it, but the skin on the finger is unavoidable If you don't, you'll get hurt.

Secondly, if the swelling is embedded in the skin and the ring cannot be moved, the above method will not work, so it can only be removed with tools. Traditionally, there are several kinds of tools used to remove the ring. In addition to the ring pliers, you can also use other destructive forceps to cut the ring. However, when using tools to destroy rings, the most fear is to encounter a ring with too hard material. Sometimes, it is very difficult to find a broken tool. Therefore, in the process of destruction, in addition to protecting the inner skin of the ring, it is not a choice to first make a gap in the ring, and then destroy it with more appropriate tools along the gap. If none of these methods can remove the ring or cause finger necrosis due to ischemia for a long time, you can only enter the operating room to anaesthetize the hand, and then debridement and remove the ring in the operating room.

When choosing to wear a ring, it is necessary to select the appropriate ring ring ring, and the best hardness is not too hard to cause cutting difficulty. If you find that you are pregnant or gaining weight, you must pay attention to whether the ring you are wearing is stuck on your finger. Once you find it, you'd better remove it as soon as the swelling is too severe. Otherwise, it will take some time to change the sausage back to a small hot dog, and the skin of the hand will inevitably be removed There will be some damage in the process. In general, the fire brigade or medical institutions providing emergency treatment can help people deal with these problems.

A lazy man's trick to take off the ring for a long time

Some women have not taken off their rings since they were married until now. When I was due to give birth, I wanted to take off the ring and put it well. I didn't expect that the finger had grown thick, and the ring was stuck in the meat. I couldn't take it off with many methods.

1. Thermal expansion and cold contraction

The ring has been worn on the hand for more than ten years, and the whole ring has been stuck in the meat unconsciously, and it can't be picked if you want to. However, if you put your hand into the refrigerator for a while, or freeze a lot of ice, put it on both sides of the finger wearing the ring, and hold it firmly on the left and right. If you cover it for about half an hour, your finger will shrink. If you apply some lubricating oil, the ring will be taken off quickly. This method is relatively simple.

2. The tool is broken directly

Find a jewelry store, ask the master in the shop to break the ring with a tool, and then reattach it. This is probably the simplest and most recommended method.

How to wear a ring

Wear it on your index finger - increase your luck

It's a fruitless love. If you just want to fall in love and don't want to get married, wear the ring on your index finger.

Wear on thumb - can increase rights

In the past, the emperor did not have to do anything. He put the ring on his thumb. In fact, it was not convenient to wear the ring. In addition, the ring with jade has the effect of lowering blood pressure, because the blood vessel ends are in the fingers. If there is hypertension, the jade ice is cold and cool, which has a soothing effect.

Wearing it on the middle finger - to build a reputation

It usually represents commitment and a feeling of recognition. Therefore, most wedding engagement rings are worn on the middle finger. Single nobles who want to get married can also wear the ring on the middle finger.

Wear it on the ring finger to prevent leakage of money and villains.

Because the wealth line is between the ring finger and the middle finger. If you want to prevent villains, you should wear this finger, because villains usually stab your anonymous in the dark.